Leica TM6100A

Leica Industrial Theodolite


       Leica Geosystems’ Industrial Theodolites are known around the world for being the most accurate, with the highest angular accuracy of 0.5”. These autocollimating theodolites have set the benchmark with unrivalled precision and superb optics. Now Leica Geosystems has set the standard even higher by incorporating more features and benefits into their latest industrial theodolite: the Leica TM6100A.



Engineered with leading edge technology

       Leica Geosystems has redesigned the direct drive technology for the Leica TM6100A, using the same Piezo technology that is used in the Leica TDRA6000 and the Leica Absolute Tracker AT402. These direct drives offer the stability of manual drives, the flexibility of fully automated motorized drives and still allow for sub micron level fine positioning. The fine adjustment knobs on the Leica TM6100A have been strategically repositioned to help make measuring in difficult situations easier and because there are no gears with this new technology, the direct drives require almost no maintenance and are nearly silent. Not only does the Leica TM6100A have a newly designed battery concept, but since the Piezo direct drive technology requires low power consumption, the battery lasts longer. Users can work more than a full day without having to charge or change the battery


Designed with the operator in mind

       Leica Geosystems has added features to the screen and interface of the Leica TM6100A. The color touch screen remains clearly visible at all times, allowing operators to take the theodolite to any location. The intuitive user interface allows users to have minimal training before doing basic measurements and calibrations to the sensor. The interface offers function keys that can be set for specific procedures, six of the 12 function keys are already pre-set with the most commonly used procedures. Leica Geosystems continues to take industrial measurement to new levels with the Leica TM6100A.

Accuracy 

Std. Dev. Hz, V, ISO 17123-3      0.15 mgon (0.5”) 
Display least count                        0.01 mgon (0.01”) 

Focussing distance (Shortest focussing distance)

from telescope front lens            0.51 m 
from telescope tilting axis          0.60 m 

Telescope

Type                                          Panfocal alignment telescope 
Image                                         Erect 
Objective aperture                     52 mm 
Clear objective diameter           40 mm 
Focusing                                   Coarse and fine 

Telescope tilt 
pointing direction down            –55° (–60 gon) 
pointing direction up                 +47° (+52 gon) 

Compensator 

Setting Accuracy                        0.15 mgon (0.5”) 
Setting range                            0.07 gon (4”) 

Special features 
Built-in autocollimation device (green negative crosshair) 
Illumination AL51 plug-in lamp keyboard switch

This information is taken www.leica-geosystems.com